Use high -power wireless network bridge
Materials that need to be prepared: a pair of high -power net bridges, poles to install network bridges;
The outdoor high -power network bridge uses a targeted high -gain antenna with a wider range of radiation. According to the power, it can achieve a coverage of more than 5 kilometers;
2. In order to avoid wireless interference, most of the wireless network bridges use 5G frequency bands to connect, less interference, higher access rate, low delay, and stable network speed, which can meet the transmission needs of video surveillance; Connect the equipment at both ends to achieve the transmission of network signals. The connection method is shown in the figure below.
Use fiber transmission
Materials that need to be prepared: a pair of single -core light collectors, leather fiber above 500 meters;
Using outdoor cortex fiber, this fiber is very suitable for the field environment and is not affected by the external environment. It realizes the long -range transmission of network signals. Part of the cost;
A pair of light -collectors are connected to the network equipment and monitoring of the family, using optical fiber transmission network signals to achieve networking.
To realize the long -range communication of wireless WIFI signals. According to the needs of the user environment, in the appropriate method, you can use the optical fiber networking method or you can use the network bridge wireless networking method. The optical fiber transmission method is more stable than the wireless network bridge method. If only the monitoring signal is transmitted, it can meet the needs.
