KS50034
KEESUN
KS50034
Availability: | |
---|---|
Quantity: | |
Panel outdoor waterproof antenna
Specification:
Electrical Specifications | |
Model | KS50034 |
FreqRange | 2400-2500MHz |
Gain | 11±1dBi |
Horizontal Beamwidth | 30±10° |
Vertical Beamwidth | 90±10° |
VSWR | ≤1.5 |
front-to-back ratio() | ≧23dB |
Impedance | 50Ω |
Polarization | ±45° |
(Max. Power | 50W |
Connector | 2*N-Female |
Lightning Protection) | DC~Ground |
Mechanical Specifications | |
mm(Dimension) | 190*190*58mm |
kg(Weight) | 0.75kg |
Rated Wind Velocity | 36.9m/s |
Operational Humidity | <95% |
Operating temperature | -40~55℃ |
Radome material | ABS(White) |
Name1
Name2
Name1
Name2
Outdoor plate waterproof antenna
The installation method of outdoor directional antenna usually includes the following steps:
1. Select the appropriate installation position: Ensure that the antenna can obtain the best signal reception and transmission effect.
2. Fixing the support: Install the support and fix it in an appropriate position to ensure that the support is stable and reliable.
3. Install the antenna: Install the directional antenna on the support, and adjust the direction of the antenna to point at the target signal source or receiver.
4. Connect the cable: Connect the cable to the interface of the antenna, and connect the other end to the communication device.
5. Debugging test: Debug and test the antenna through the signal test instrument to ensure that the signal transmission quality meets the requirements.
Panel outdoor waterproof antenna
Specification:
Electrical Specifications | |
Model | KS50034 |
FreqRange | 2400-2500MHz |
Gain | 11±1dBi |
Horizontal Beamwidth | 30±10° |
Vertical Beamwidth | 90±10° |
VSWR | ≤1.5 |
front-to-back ratio() | ≧23dB |
Impedance | 50Ω |
Polarization | ±45° |
(Max. Power | 50W |
Connector | 2*N-Female |
Lightning Protection) | DC~Ground |
Mechanical Specifications | |
mm(Dimension) | 190*190*58mm |
kg(Weight) | 0.75kg |
Rated Wind Velocity | 36.9m/s |
Operational Humidity | <95% |
Operating temperature | -40~55℃ |
Radome material | ABS(White) |
Name1
Name2
Name1
Name2
Outdoor plate waterproof antenna
The installation method of outdoor directional antenna usually includes the following steps:
1. Select the appropriate installation position: Ensure that the antenna can obtain the best signal reception and transmission effect.
2. Fixing the support: Install the support and fix it in an appropriate position to ensure that the support is stable and reliable.
3. Install the antenna: Install the directional antenna on the support, and adjust the direction of the antenna to point at the target signal source or receiver.
4. Connect the cable: Connect the cable to the interface of the antenna, and connect the other end to the communication device.
5. Debugging test: Debug and test the antenna through the signal test instrument to ensure that the signal transmission quality meets the requirements.