Keesun - Shenzhen Keesun Technology Co.,Ltd.
Empowering global connectivity through innovative antenna solutions
ISO 14001~ISO 9001
  Call Us
+86-18603053622
Omni Antenna 3.7~4.2G Outdoor Waterproof Antenna for UAV
You are here: Home » Products » Omni antenna » 3.7~4.2Ghz » Omni Antenna 3.7~4.2G Outdoor Waterproof Antenna for UAV

loading

Omni Antenna 3.7~4.2G Outdoor Waterproof Antenna for UAV

Specification:
FreqRange:3.7~4.2G
Gain:2±1dBi
Horizontal Beamwidth:360°
Vertical Beamwidth:25±3°
VSWR:≤1.92
Impedance:50Ω
Polarization:V
Max. Power:50W
Connector:N-Male
Lightning Protection:DC grounding
SIZE:100*20mm
  • FG00018

  • KEESUN

  • FG00018

Availability:
Quantity:


Fiberglass antenna


What is the role of glass fiber reinforced plastic, is it better for indoor value or outdoor value? A lot of people will wonder if they use it indoors, if the house will become a cell tower. Just kidding, of course. Because the vertical Angle is small, the signal can only be transmitted at 6 to 8 degrees horizontally, so the fiberglass antenna is widely used for wireless coverage in the plain area, wireless coverage in the same horizontal position environment, and wireless coverage in the same horizontal position environment, if the frame is in a higher position,


Are pursuing high antenna gain. However, in indoor household or industrial routers, such as Cisco, Huawei, D-LINK, etc., the antenna selection is generally 2-5dBi, and high-gain antennas are rarely used. This is because, on the one hand, the high-gain antenna is generally large in size and inconvenient to install; on the other hand, the high-gain omnidirectional antenna, although omnidirectional radiation on the horizontal plane, has a narrow radiation Angle coverage on the vertical plane (small lobe width), which is counterproductive within a relatively short communication distance (explained in the paper). Therefore, antennas with gains below 8dBi are generally selected for short-range coverage in the room.


When using a high-gain FRP antenna, it is necessary to pay attention to the radiation pattern of the FRP antenna, especially the lobe width of the vertical plane. In the outdoor where the communication distance is required to be very far, high-gain FRP antennas are usually used, and the radiation Angle on the vertical surface of the antenna will be very narrow, so the transceiver antenna is required to ensure that the same horizontal position is as far as possible. What is the difference between FRP antenna and ordinary antenna? FRP antennas are not afraid of water compared with ordinary antennas, and the antenna structure is somewhat different from ordinary upright antennas, but the principle is the same.


A normal antenna has a lower gain, a closer range, but the lobe width, that is, the surrounding coverage, is larger. Typical is the satellite antenna, the gain is very high, but almost only effective for the front, the Angle is very small, and the base station directional antenna can cover a range of 120 degrees.


Name Value
Antenna Type Omni antenna
Impedance 50
Minimum Operating Temperature -40°C
Maximum Operating Temperature 85°C
Mounting Style Wall/Pole
Termination Style Connector
Antenna Connector Type N Type
Connector Body Style Straight
Polarity Vertical
Frequency Range 2.4GHz
Connector Polarity Normal
Cable Length (mm) n/a
Packaging Tube, Carton
VSWR <1.92
IP Rating IP65
RoHS Yes
Gain (Max) 5
Length (mm) 300
Width (mm) 20
Height (mm) 20
Weight (g) 190



Previous: 
Next: 
Shenzhen Keesun Technology Co.,Ltd was founded in Aug of 2012, a high-tech enterprise specializing in various types of antenna and network cable manufacturing.

Quick Links

Product Category

Contact Us

    +86-18603053622
    +86-13277735797
   4th Floor, Building B, Haiwei Jingsong Industrial Zone Heping Community Fuhai Street, Baoan District, Shenzhen City.
Copyright © 2023 Shenzhen Keesun Technology Co.,Ltd. Supported by Leadong.com. Sitemap